Valeton VPS-6 fully Isolated Power Supply for guitar effects pedals.

Overview
VPS-6 is a flexible and reliable high-output power supply. The double-isolated
power supply design can provide independent and pure power for up to 6 effect pedals (stomp box or partial multi-effects processor).The wide-range AC power
input can adapt to common voltages around the world, which can provide
convenience and security for your world tour. It can be used alone, or as the main
power supply in your power supply system, and cooperate with other power
supply equipment to form system with more outputs.

Connect Your Pedals

Each output of VPS-6 is designed with double isolation, which can supply power to most of the pedals

on the market with extremely low noise floor. At the same time, please confirm whether the

recommended voltage, polarity and required current of the pedal in use are consistent with the output

specifications of VPS-6.

1. IEC CABLE:

Connect the included IEC cable to VPS-6 and plug the other end into an AC power outlet.

2. 24V DC OUT:

Connect other 24V DC input power supply to get more power outputs, 24V DC (1500mA) center-positive.

3. 9V DC OUTPUTS:

Four outputs provide 9V DC, center negative polarity, each with 500mA of available current.

4. ADJUSTABLE OUTPUTS:

Two outputs provide selectable 9V, 12V, or 18V DC with center negative polarity. It provides 500mA of

available current at 9V, 375mA at 12V, and 250mA at 18V. Make sure this output is set to 9V before

connecting conventional 9V pedals.

5. LED INDICATORS:

Each output is equipped with an LED indicator light, LED illuminates red when a pedal cable is plugged

in. LED will turn off if cable is unplugged, or the load device is short-circuited. After troubleshooting, the

power will return to normal and so will the LED. Power supply will enter hiccup protection status if the

current draw on the output exceeds the maximum amount available, the LED will then blink.

Features

·6 high current, fully isolated outputs with center-negative polarity

-4 dedicated 9V DC outputs (500mA)

-2 adjustable outputs outputs offer 9V (500mA), 12V (375mA), or 18V (250mA) DC options

·Each 9V DC output power supply can supply power for most pedals

·Contains 9 power cables available for output:

-6×9V cables, straight to Right-angled 60cm

-1×9V cable, straight to Right-angled 30cm

-1×9V cable, straight to Right-angled 90cm

-1×24V cable, straight to straight-angled 60cm

·Contains an IEC power cable for powering VPS-6 in a specific region

·Contains a 9V battery connection cable and a polarity reversal cable

·DC 24V OUT 1500mA for expanding other power supply products

·6 independent customized transformers to ensure clean and reliable power supply

for each channel

·Each channel has overload and short-circuit protection, and LED are used to indicate

the current status, which is convenient for troubleshooting and equipment protection.

·Wide-range voltage input, self-adapting to the AC voltage of various countries and regions.

·Energy efficient compact design

Specifications
Input: 100-240V AC 50/60Hz
9V DC Outputs: 4×9V DC, 500mA, center-negative
Adjustable Outputs: 2×9V DC (500mA) /12V DC (375mA) /18V DC (250mA)
center-negative
24V DC Output: 1×24V DC, 1500mA, center-positive
Dimensions: 158mm (W) × 98mm (D) × 32mm (H)
Weight: 450g